Citations

• Diomidis Spinellis and Chrissoleon T. Papadopoulos. A simulated annealing approach for buffer allocation in reliable production lines. Annals of Operations Research, 93:373–384, 2000. (doi:10.1023/A:1018984125703)

• G. Allon, T. Raviv, and R. Y. Rubinstein. Application of the cross entropy method for buffer allocation problem in simulation based environment. In Third International Aegean Conference on the Analysis and Modelling of Manufacturing Systems, pages 269–278. University of the Aegean, May 2001.

• G. Allon, T. Raviv, and R. Y. Rubinstein. Application of the cross entropy method for buffer allocation problem in simulation based environment. In Fourth Workshop on Rare Event Simulation and Related Combinatorial Optimization Problems, RESIM/COP'02, April 2002.

• C. Roser, M. Nakano, and M. Tanaka. Buffer allocation model based on a single simulation. In Winter Simulation Conference Proceedings, volume 2, pages 1238–1246, 2003.

• C. Roser, M. Nakano, and M. Tanaka. Economic optimization in manufacturing systems through optimal buffer allocation. In IFAC Multitrack Conference on Advanced Control Strategies for Social and Economic Systems, September 2004.

• G. Alon, D.P. Kroese, T. Raviv, and R.Y. Rubinstein. Application of the cross-entropy method to the buffer allocation problem in a simulation-based environment. Annals of Operations Research, 134(1-4):137–151, 2005. (doi:10.1007/s10479-005-5728-8)

• H. Toba. A tight flow control for job-shop fabrication lines with finite buffers. IEEE Transactions on Automation Science and Engineering, 2(1):78–83, 2005. (doi:10.1109/TASE.2004.829440)

• J. Abu Qudeiri, H. Yamamoto, and M.A. Jamali. Buffer size decision for balanced and unbalanced flexible transfer line with rework paths. In ICPMT2006 — Progress of Machining Technology — Proceedings of the 8th International Conference on Progress of Machining Technology, pages 77–80, 2006.

• E.K. Lee, S. Maheshwary, J. Mason, and W. Glisson. Decision support system for mass dispensing of medications for infectious disease outbreaks and bioterrorist attacks. Annals of Operations Research, 148(1):25–53, 2006. (doi:10.1007/s10479-006-0087-7)

• E.K. Lee, S. Maheshwary, J. Mason, and W. Glisson. Large-scale dispensing for emergency response to bioterrorism and infectious-disease outbreak. Interfaces, 36(6):591–607, 2006. (doi:10.1287/inte.1060.0257)

• N. Nahas, D. Ait-Kadi, and M. Nourelfath. A new approach for buffer allocation in unreliable production lines. International Journal of Production Economics, 103(2):873–881, 2006. (doi:10.1016/j.ijpe.2006.02.011)

• C. Roser, M. Nakano, and M. Tanaka. Single simulation buffer optimization. JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, 48(4):763–768, 2006. (doi:10.1299/jsmec.48.763)

• I. Sabuncuoglu, E. Erel, and Y. Gocgun. Analysis of serial production lines: Characterisation study and a new heuristic procedure for optimal buffer allocation. International Journal of Production Research, 44(13):2499–2523, 2006. (doi:10.1080/00207540500465535)

• M. Savsar. Buffer allocation in serial production lines with preventive and corrective maintenance operations. Kuwait Journal of Science and Engineering, 33(2):253–266, 2006.

• G. Liberopoulos, G. Kozanidis, and P. Tsarouhas. Performance evaluation of an automatic transfer line with WIP scrapping during long failures. Manufacturing and Service Operations Management, 9(1):62–83, 2007. (doi:10.1287/msom.1060.0118)

• J.A. Qudeiri, H. Yamamoto, and M. Jamali. Development of new production simulator for complex production systems design. In 37th International Conference on Computers and Industrial Engineering 2007, volume 2, pages 1521–1531, 2007.

• L. Demir and S. Tunali. A new approach for optimal buffer allocation in unreliable production lines. In 38th International Conference on Computers and Industrial Engineering 2008, volume 2, pages 1962–1970, 2008.

• M. Yuzukirmizi and J. M. Smith. Optimal buffer allocation in finite closed networks with multiple servers. Computers and Operations Research, 35(8):2579–2598, 2008. (doi:10.1016/j.cor.2006.12.008)

• N. Nahas, M. Nourelfath, and D. Ait-Kadi. Selecting machines and buffers in unreliable series-parallel production lines. International Journal of Production Research, 47(14):3741–3774, 2009. (doi:10.1080/00207540701806883)

• H.A. Vergara and D.S. Kim. A new method for the placement of buffers in serial production lines. International Journal of Production Research, 47(16):4437–4456, 2009. (doi:10.1080/00207540801939022)

• I.V. Vitanov, V.I. Vitanov, and D.K. Harrison. Buffer capacity allocation using ant colony optimisation algorith. In Proceedings - Winter Simulation Conference, pages 3158–3168, 2009. (doi:10.1109/WSC.2009.5429277)

• L. Demir, S. Tunali, and D.T. Eliiyi. An adaptive tabu search approach for buffer allocation problem in unreliable production lines. In 24th Mini EURO Conference on Continuous Optimization and Information-Based Technologies in the Financial Sector, MEC EurOPT 2010, pages 207–212. Vilnius Gediminas Technical University, 2010.

• D.E. Koulouriotis, A.S. Xanthopoulos, and V.D. Tourassis. Simulation optimisation of pull control policies for serial manufacturing lines and assembly manufacturing systems using genetic algorithms. International Journal of Production Research, 48(10):2887–2912, 2010. (doi:10.1080/00207540802603759)

• Y. Massim, F. Yalaoui, L. Amodeo, E. Chatelet, and A. Zeblah. Efficient combined immune-decomposition algorithm for optimal buffer allocation in production lines for throughput and profit maximization. Computers and Operations Research, 37(4):611–620, 2010. (doi:10.1016/j.cor.2009.06.016)

• W. Abdul-Kader, O. Ganjavi, and F. Baki. A nonlinear model for optimizing the performance of a multi-product production line. International Transactions in Operational Research, 18(5):561–577, 2011. (doi:10.1111/j.1475-3995.2011.00814.x)

• J. Bernedixen and A.H.C. Ng. Optimal buffer allocation for semi-synchronized automotive assembly lines using simulation-based multi-objective optimization. In 2011 9th International Industrial Simulation Conference, ISC 2011, pages 129–135. EUROSIS, 2011.

• L. Demir, S. Tunali, and A. Lkketangen. A tabu search approach for buffer allocation in production lines with unreliable machines. Engineering Optimization, 43(2):213–231, 2011. (doi:10.1080/0305215X.2010.481022)

• S. Shaaban. Unpaced production lines with jointly unbalanced operation time means and buffer capacities - their behaviour and performance. International Journal of Manufacturing Technology and Management, 23(1-2):54–68, 2011. (doi:10.1504/IJMTM.2011.042108)

• J. Bernedixen and A. Syberfeldt. A comparative study of production control mechanisms using simulation-based multi-objective optimisation. International Journal of Production Research, 50(2):359–377, 2012. (doi:10.1080/00207543.2010.538741)

• L. Demir, S.Y. Köse, S. Tunali, and D.T. Eliiyi. An integrated binary-tabu search approach for the buffer allocation problem: An industrial case study. In 24th European Modeling and Simulation Symposium, EMSS 2012, pages 44–49, 2012.

• L. Demir, S. Tunal, and D.T. Eliiyi. An adaptive tabu search approach for buffer allocation problem in unreliable non-homogenous production lines. Computers and Operations Research, 39(7):1477–1486, 2012. (doi:10.1016/j.cor.2011.08.019)

• S.Y. Kose and O. Kilincci. Hybrid simulated annealing/genetic algorithm approach to buffer allocation problem in unreliable production lines. In 10th International Fuzzy Logic and Intelligent Technologies inNuclear Science Conference, FLINS 2012, volume 7, pages 981–986, 2012.

• A. Matta, M. Pezzoni, and Q. Semeraro. A Kriging-based algorithm to optimize production systems approximated by analytical models. Journal of Intelligent Manufacturing, 23(3):587–597, 2012. (doi:10.1007/s10845-010-0397-0)

• S. Shaaban and S. Hudson. Transient behaviour of unbalanced lines. Flexible Services and Manufacturing Journal, 24(4):575–602, 2012. (doi:10.1007/s10696-011-9110-7)

• L. Demir, S. Tunali, D.T. Eliiyi, and A. Løkketangen. Two approaches for solving the buffer allocation problem in unreliable production lines. Computers and Operations Research, 40(10):2556–2563, 2013.

• E. Gebennini, A. Grassi, C. Fantuzzi, S.B. Gershwin, and I.C. Schick. Discrete time model for two-machine one-buffer transfer lines with restart policy. Annals of Operations Research, 209(1):41–65, 2013. (doi:10.1007/s10479-011-0868-5)

• C.T. Papadopoulos, M.E.J. Okelly, and A.K. Tsadiras. A DSS for the buffer allocation of production lines based on a comparative evaluation of a set of search algorithms. International Journal of Production Research, 51(14):4175–4199, 2013. (doi:10.1080/00207543.2012.752585)

• Y. Zhao, X. Pan, C.C. Li, G. Yao, J. Wu, X. Fu, D. Lai, D. Li, and Q. Zhang. Modeling and case study of the production line layout system. Open Automation and Control Systems Journal, 5(1):51–58, 2013. (doi:10.2174/1874444301305010051)

• Y. Zhao, X.Y. Pan, and C.C. Li. Modeling and case study of the production line layout system. 9th International Symposium on Linear Drives for Industry Applications, LDIA 2013, 416-417:1373–1380, 2013. (doi:10.4028/www.scientific.net/AMM.416-417.1373)

• Y. Zhao, X.Y. Pan, C.C. Li, G.H. Yao, J. Wu, X. Fu, D. Lai, D. Li, and Q.W. Zhang. Optimal production linelayout model based on integer programming. Advanced Materials Research, 690 693:2896–2900, 2013.

• M. Abdullah and M. Othman. Simulated annealing approach to cost-based multi-quality of service job scheduling in cloud computing enviroment. American Journal of Applied Sciences, 11(6):872–877, 2014. (doi:10.3844/ajassp.2014.872.877)

• L. Demir, S. Tunali, and D.T. Eliiyi. The state of the art on buffer allocation problem: A comprehensive survey. Journal of Intelligent Manufacturing, 25(3):371–392, 2014. (doi:10.1007/s10845-012-0687-9)

• J. Müller, C.A. Shoemaker, and R. Piché. SO-i: A surrogate model algorithm for expensive nonlinear integer programming problems including global optimization applications. Journal of Global Optimization, 59(4):865–889, 2014. (doi:10.1007/s10898-013-0101-y)

• C. Su and A. Xu. Buffer allocation for hybrid manufacturing/remanufacturing system considering quality grading. International Journal of Production Research, 52(5):1269–1284, 2014. (doi:10.1080/00207543.2013.828165)

• H.-Q. Wang, X.-M. Xue, and W.-Y. Lv. Improved degraded ceiling algorithm for optimal buffer allocation in unreliable production lines. Kongzhi yu Juece/Control and Decision, 29(8):1424–1428, 2014. (doi:10.13195/j.kzyjc.2013.0770)

• E. Gebennini, A. Grassi, and C. Fantuzzi. The two-machine one-buffer continuous time model with restart policy. Annals of Operations Research, 231(1):33–64, 2015. (doi:10.1007/s10479-013-1373-9)

• S.Y. Kose and O. Kilincci. Analyzing buffer allocations using utilization-based search methods. In 45th International Conference on Computers and Industrial Engineering, CIE 2015. Universite de Lorraine, 2015.

• S.Y. Kose and O. Kilincci. Hybrid approach for buffer allocation in open serial production lines. Computers and Operations Research, 60:67–78A, 2015. (doi:10.1016/j.cor.2015.01.009)

• S.Y. Köse, L. Demir, S. Tunal, and D.T. Eliiyi. Capacity improvement using simulation optimization approaches: A case study in the thermotechnology industry. Engineering Optimization, 47(2):149–164, 2015. (doi:10.1080/0305215X.2013.875166)

• K.L. Narasimhamu, V. Venugopal Reddy, and C.S. Rao. Optimization of buffer allocation in manufacturing system using particle swarm optimization. International Review on Modelling and Simulations, 8(2):212–222, 2015.

• T. Voigt, S. Flad, and P. Struss. Model-based fault localization in bottling plants. Advanced Engineering Informatics, 29(1):101–114, 2015. (doi:10.1016/j.aei.2014.09.007)

• S. Weiss and R. Stolletz. Buffer allocation in stochastic flow lines via sample-based optimization with initial bounds. OR Spectrum, 37(4):869–902, 2015. (doi:10.1007/s00291-015-0393-z)

• L. Li, Y. Qian, K. Du, and Y. Yang. Analysis of approximately balanced production lines. International Journal of Production Research, 54(3):647–664, 2016. (doi:10.1080/00207543.2015.1015750)

• L. Li, Y. Qian, Y. Yang, and K. Du. A common model for the approximate analysis of tandem queueing systems with blocking. IEEE Transactions on Automatic Control, 61(7):1780–1793, 2016. (doi:10.1109/TAC.2015.2478127)

• L. Li, Y. Qian, Y.M. Yang, and K. Du. A fast algorithm for buffer allocation problem. International Journal of Production Research, 54(11):3243–3255, 2016. (doi:10.1080/00207543.2015.1092612)

• C. Shi and S.B. Gershwin. A segmentation approach for solving buffer allocation problems in large production systems. International Journal of Production Research, 54(20):6121–6141, 2016. (doi:10.1080/00207543.2014.991842)

• B. Zhou and J. Yu. Buffer allocation method of serial production lines based on improved ant colony optimization algorithm. High Technology Letters, 22(2):113–119, 2016. (doi:10.3772/j.issn.1006-6748.2016.02.001)

• M. Al-Salem, M. Almomani, M. Alrefaei, and A. Diabat. On the optimal computing budget allocation problem for large scale simulation optimization. Simulation Modelling Practice and Theory, 71:149–159, 2017. (doi:10.1016/j.simpat.2016.05.004)

• N. Nahas. Buffer allocation and preventive maintenance optimization in unreliable production lines. Journal of Intelligent Manufacturing, 28(1):85–93, 2017. (doi:10.1007/s10845-014-0963-y)

Unless otherwise expressly stated, all original material on this page created by Diomidis Spinellis is licensed under a Creative Commons Attribution-Share Alike 3.0 Greece License.